Agilent Technologies Turbo-V 2000 ICE Bedienungshandbuch Seite 235

Where:
X
T
Press the PUMP CURRENT push-button and the display shows:
X
N
Where:
L
T
Where:
Turbo-V 2000 ICE Controller User Manual / 87-900-929-01 (L)
I = is the DC current drawn by the pump range (0.00 to 10.0 A)
P = is the DC power drawn by the pump (range 0 to 999 Watt)
KRPM = is the theoretical rotational speed of the pump as a
function of the controller output frequency (range 3 to 33 KRPM)
T1 = is the temperature of the outer ring of the upper bearing
(range 00 to 99°C)
T2 = is the temperature of the outer ring of the lower bearing
(range 00 to 99°C)
Press the PUMP CURRENT push-button and the display shows:
X K R
1 = X. X.
X K R
2 =
N2 = Gas flow (Nitrogen or Argon) expressed in SCCM (Standard
cubic centimeters per minute)
Press the PUMP CURRENT push-button and the display shows:
A S T
= X X X
Last alarm = number of alarms sounded
T = Pump life span relating to the last alarm
C = Cycle during which the last alarm occured
P M P
° C I
P M P
X X X S
A L A R M
X X h C
Technical Information
Use
= X X X W
= X X .
= X X X W
C C M
: X X X
= X X X
235/260
17
X A
X X
X X