Dimplex LA 35TBS Montage- Und Gebrauchsanweisungen Seite 28

English
7 Complies with the European safety regulations
8 Additional model features
8.1 Type of defrosting
8.2 Frost protection, condensate tray /
Water in device protected against freezing
8.3 Max. operating overpressure (heat sink)
9 Heat output / COP
9.1 Heat output / coefficient of performance (COP)
1. For air temperatures of -22 °C to 0 °C, flow temperature increasing from 45 °C to 60 °C.
2. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, other parameters, in
particular the defrosting capacity, the bivalence point and regulation, should also be taken into consideration. These figures are only achieved with clean heat exchangers.
Information on maintenance, commissioning and operation can be found in the respective sections of the installation and operating instructions.
The specified values have the following meaning, e.g. A2 / W35: 2 °C outside temperature and 35 °C heating water flow temperature.
3. The heat output and COP is reduced by approx. 5 % in lower operation
4. The maximum sound power level under full load can increase up to 5 dB(A)
5. The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
6. Please note that additional space is required for pipe connections, operation and maintenance
7. See CE declaration of conformity
8. The heat circulating pump and the heat pump manager must always be ready for operation.
EN-12
8
Performance level
at A-7 / W35
at A2 / W35
at A7 / W35
at A7 / W45
at A7 / W55
452166.66.11c · FD 0212
Reverse circulation
bar
1
kW / --- 12.5 / 3.33
kW / --- 14.1 / 3.56
kW / --- 17.6 / 4.33
kW / --- 18.0 / 3.70
kW / --- 17.4 / 3.11
LA 35TBS
7
Yes
3,0
EN 14511
2
22.3 / 3.10
23.7 / 3.35
--
--
--
www.dimplex.de