General Information About The Homematic System; Start-Up; Mounting - HomeMatic HM-Dis-EP-WM55 Montageanleitung Und Bedienungsanleitung

4 General information about
the Homematic system
This device is part of the Homematic home control
system and works with the bidirectional Homematic
wireless protocol. All devices are delivered in a stand-
ard configuration. The functionality of the device can
also be configured with a programming device and
software. The additional functions that can be made
available in this way and the supplementary functions
provided by the Homematic system when it is com-
bined with other components are described in the
Homematic WebUI Manual.
All current technical documents and updates are pro-
vided at www.homematic.com.
5

Start-up

5.1

Mounting

Please read this entire section before starting to
mount the device.
You can use the supplied clip-on frame (B) to mount
the status display or easily integrate it into an existing
switch (see sec. "5.1.3 Installation in multiple combina-
tions" on page 47).

General information about the Homematic system

43