Configuring Newly Taught-In Devices - HomeMatic HM-Dis-EP-WM55 Montageanleitung Und Bedienungsanleitung

Start-up
inbox as described in the next section ("Config-
uring newly taught-in devices").
After teach-in has been performed, multiple operating
functions are available for use. You will find further in-
formation in section „6 Operation".
5.4 Configuring newly taught-in
devices
Once you have taught-in your device to the Homematic
Central Control Unit, it is moved to the inbox. Here,
you must configure the device and its associated
channels in order to make them available for operating
and configuration tasks. Give the device a name and
assign the device/channels to a room. You can also
make individual parameter settings.
Now you can use the "WebUI" user interface to control
your device, configure it, connect it directly to other de-
vices, or use it in central control unit programs. Please
refer to the Homematic WebUI Manual for more details
(you can find this in the "Downloads" area of the web-
site www.homematic.com).
56