Maintenance And Cleaning - HomeMatic HM-Dis-EP-WM55 Montageanleitung Und Bedienungsanleitung

Maintenance and cleaning

Possible error messages:
If the device LED does not start to flash once the but-
ton has been held down for 5 seconds but lights up
continuously instead, this means it cannot be reset as
it is taught-in to the Homematic WebUI.
Please refer to the Homematic WebUI Manual
for more details about resetting devices via the
WebUI (you can find this in the "Downloads"
area of the website www.homematic.com).
9 Maintenance and cleaning
The device does not require you to carry out any
maintenance other than replacing the battery
when necessary. Enlist the help of an expert to
carry out any maintenance or repairs.
Clean the device using a soft, lint-free cloth that is
clean and dry. You may dampen the cloth a little with
lukewarm water in order to remove more stubborn
marks. Do not use any detergents containing solvents,
as they could corrode the plastic housing and label.
64