Device Led And Audible Signal; Information Indicated By The Device Led - HomeMatic HM-Dis-EP-WM55 Montageanleitung Und Bedienungsanleitung

6.3

Device LED and audible signal

Switching commands are confirmed by the device LED
(G). If an action is triggered via the status display (e.g.
lights on), the device LED (G) lights up green if the
action has been successfully transmitted. If the action
failed, the device LED (G) lights up red. Status mes-
sages can also be generated via flashing signals and/
or audible signals.The additional signals can be added
via the CCU command of the corresponding status
message.
Please refer to the Homematic WebUI Manual for
more details (you can find this in the "Downloads"
area of the website www.homematic.com).
7 Information indicated by the
device LED
This information applies to operation with and without
a Central Control Unit.
Radio transmission
LED signal
Flashing orange

Information indicated by the device LED

Meaning
Currently transmitting radio
signal
59