Duty Cycle Limit Reached - HomeMatic HM-Dis-EP-WM55 Montageanleitung Und Bedienungsanleitung

One long and one
short red flash
One long and three
short red flashes
Restore factory settings
LED signal
Slow red flashing
Fast red flashing
7.1

Duty cycle limit reached

The duty cycle is a legally regulated limit of the trans-
mission time of devices in the 868 MHz range. The
aim of this regulation is to safeguard the operation of
all devices working in the 868 MHz range.
Information indicated by the device LED
Duty cycle exceeded (see sec.
"7.1 Duty cycle limit reached"
on page 61)
Status messages by Central
Control Unit have not been
fully received.
Meaning
Stage before resetting to
factory settings (device is
waiting for teach-in button to
be pressed and held in order
to carry out a reset, or for a
short button press to cancel
the process)
Factory settings of the device
are being restored
61