HomeMatic HM-Dis-EP-WM55 Montageanleitung Und Bedienungsanleitung Seite 63

five seconds. The device LED starts to slowly
flash red.
• To reset the device, briefly release the teach-
in button and then press it again for at least 5
seconds
• With the button pressed, the device LED will
now start to flash red faster.
• Release the button to complete the reset pro-
cess. For confirmation, the device is restarted
(display test and LED test). The device LED
lights up red continuously for approx. 3 seconds.
• If you want to cancel the reset procedure, you
can either press the teach-in button briefly or
wait for 20 seconds. In both cases, the slow red
flashing will stop.
Restore factory settings
> 5 s
63