Adhesive Strip Mounting - HomeMatic HM-Dis-EP-WM55 Montageanleitung Und Bedienungsanleitung

Start-up
If you want to mount the status display with the sup-
plied clip-on frame, you can use
• the supplied double-sided adhesive strips or
• the supplied screws
to fix it to a wall.

5.1.1 Adhesive strip mounting

For mounting the assembled device to the wall using
adhesive strips, please proceed as follows:
• Choose a site for installation.
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and
solvents and not too cold to ensure long-time
adherence.
• Fix the adhesive strips on the back side of the
mounting plate (A) in the provided area. You
should be able to read the letters on the back
side (according to figure).
44