Fault/Remedy; Declaration Of Conformity - ADE KA 1802 Bedienungsanleitung

Fault/Remedy

Fault/Remedy
Fault
No function.
Meat is poorly processed.
Meat becomes hot, grey or greasy
during cutting.
The motor is blocked.
The device switches off during use.

Declaration of Conformity

Waagen-Schmitt GmbH hereby declares that the mincer KA 1801 complies with EU
directives 2014/30/EU, 2014/35/EU, and 2011/65/EU.
This declaration loses its validity if modifications are made to the product without our
approval.
Hamburg, August 2021
Waagen-Schmitt GmbH
40
Druckbuch Fleischwolf KA 1802 3 Sprachen A5.indb 40 Druckbuch Fleischwolf KA 1802 3 Sprachen A5.indb 40
Possible Cause
‚ Check if the power cord is plugged.
‚ Check that you have mounted the cross
blade properly (see Fig. 4).
‚ The cross blade is blunt and must be
replaced with a new one. Replacement
cross blades can be reordered for a fee.
Please email us at our service address:
service@ade-germany.de
‚ Use the reverse function to remove
jammed meat from the filling tube; see
section "Reverse function".
‚ The overheat protection has tripped; see
section "Overheat protection".
Mincer KA 1801
10.08.2021 13:27:30 10.08.2021 13:27:30