In this case:
1. Turn the mode selector switch to l and unplug the power cord from the mains
outlet.
2. Allow the mincer to cool down for at least 60 minutes.
Eventually, you can use the device again as usual.
Making mince
Assembly
Fig. 1
Fig. 2
Mincer KA 1801
Druckbuch Fleischwolf KA 1802 3 Sprachen A5.indb 31
Druckbuch Fleischwolf KA 1802 3 Sprachen A5.indb 31
1. Place the mincer on a clean and
flat surface.
2. Insert the screw body with the
filling tube on it into the mincer.
3. Move the lever to the side to
secure the filling tube.
Note the lock symbols.
They indicate whether the lever
is locked or unlocked.
Making mince
31
10.08.2021 13:27:29
10.08.2021 13:27:29