Herunterladen Inhalt Inhalt Diese Seite drucken

Cargofläche Montieren; Mounting The Cargo Platform - HASE Bikes GRAVIT Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

GRAVIT − Anpassen an Körpergröße / Adjusting your GRAVIT
CARGOFLÄCHE
CARGO PLATFORM
CARGOFLÄCHE AM FAHRRAD
MONTIEREN/ DEMONTIEREN
1. Legen Sie die Cargofläche leicht geneigt mit den beiden Befesti-
gungshaken (01) auf den vorderen Ausleger des GRAVIT.
2. Drücken Sie die Cargofläche hinten nach unten und führen Sie die
Haken (02) des hinteren Verschlußmechanismus an die Einsätze (03)
am Hauptrahmen des GRAVIT.
3. Drücken Sie nun hinten auf die Cargofläche damit die Haken an den
Einsätzen einrasten.
Vergewissern Sie sich, dass die Haken ordnungs-
ACHTUNG!
gemäß an den Einsätzen am Rahmen eingerastet sind.
F ( 1 : 5 )
14
A

MOUNTING THE CARGO PLATFORM

1. Place the Cargo Platform slightly inclined with the two fastening
hooks (01) on the front boom of the GRAVIT.
2. Lower the rear section of the Cargo Platform and guide the hooks
(02) of the rear locking mechanism onto the inserts (03) on the
frame of the GRAVIT.
3. Press on the Cargo Platform until the hooks are locked onto the
inserts.
Check to make sure that the hooks are locked
CAUTION!
securely to the inserts.
04
01
G ( 1:5 )
B
D ( 1 : 5 )
B
A
HASE BIKES / GRAVIT_2023_DE-EN / 02-23
02
03

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis