Installation - Conrad HSA9001A Bedienungsanleitung

6. Installation

Proceed as follows to ensure proper installation:
• Remove your current mechanical thermostat.
• If necessary, use a pipe wrench to loosen the screw
connection.
• Remove your current thermostat by turning it anti-
clockwise (see illustration to the right).
• Firmly screw the radiator actuator onto the radiator
valve by turning the coupling nut.
The coupling nut on the radiator actuator is suit-
able, for example, for valves of the following man-
ufacturers:
Heimeier
Oventrop Type A
Oventrop AV6
Comap D805
Additional Danfoss adapters are included in delivery for:
RA, RAV, and RAVL valves.
The adapters designed for valve types "RAV" or "RA" have to be fixed with the pro-
vided screw and nut after snapping them onto the valve body.
For type "RAV" valves, the cylindrical extension piece has to be put onto the valve
pin additionally.
34
(M 30 x 1.5)
(M 30 x 1.5)
(M 30 x 1.5)
(M 30 x 1.5)