Automatic Mode - Conrad HSA9001A Bedienungsanleitung

Switch-points are deactivated by setting the time to - - : - - .
So deactivated switch-points are always displayed like this
- - : - - .
Also see the switching chart on the next page.
30˚C
28˚C
26˚C
24˚C
22˚C
20˚C
18˚C
16˚C
14˚C
12˚C
10˚C
8˚C
00:00 01:00 02:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00 00:00
The above example shows a setting with 4 switch-points (SP1
and SP2 refer to the example given on the previous page). 16°C
in the example represent the assumed night setback temperatu-
re of your heating system.
The heating-up periods depend on the characteristics of the
room (e.g. heating power, insulation ...).

AUTOMATIC mode

In this operating mode, the actuator controls the temperature according to a user-
defined threshold value within an adjustable timeframe.
In AUTOMATIC mode, the current switch-point is displayed in the right-hand corner
next to the standard display.
In addition, the heating time and the opening level of the radiator valve are dis-
played alternately (every 4 seconds).
Heating time
42
18˚C
22˚C
SP2
SP1
24˚C
SP3
Opening level of radiator valve
16˚C
SP4
Symbol: