B) Setting The Time (Hour, Minute); C) Automatic Daylight Saving Time Settings - Conrad HSA9001A Bedienungsanleitung

• Then the month flashes. Set the correct month.
• Subsequently, the day flashes (the day of the week is dis-
played at the top of the display (2)). Proceed as described
above to set the correct day.

b) Setting the time (hour, minute)

• After setting the date (year, month, day) and confirming by
pressing the "PROG" button, the time can be set. At first, the
hour flashes. Set the correct hour.
• After confirmation, the minutes start flashing. Proceed as
described above to set the minutes.

c) Automatic daylight saving time settings

• After the time (hour, minute) has been set, automatic day-
light saving time can be configured.
So: 1 = automatic daylight saving time active
So: 0 = automatic daylight saving time inactive
Press the "PROG" button to confirm your settings. Now, auto-
matic calibration of the actuator is carried out.
37