Button Functions; Switch-Point Settings - Conrad HSA9001A Bedienungsanleitung

When PROGRAMMING mode is active, "Pro" is displayed (see
right).

Button functions:

Use buttons "UP" and "DOWN" to switch between the menu options (PRO > SP4 >
SP3 > SP2 > SP1 > PRO). SP = switch-point
While PRO, SP1, SP2, SP3, or SP4 is displayed, hold down the "PROG" button
for 3 seconds to save the settings and go back to the previous operating mode.
This applies to any position in PROGRAMMING mode. Hold down the "AUTO"
button for about 3 seconds to exit PROGRAMMING mode without saving.
While PRO is displayed, press the "PROG" button to go to setting mode.
While SP1, SP2, SP3, or SP4 is displayed, press the "PROG" button to activate

switch-point settings.

Setting mode:
In setting mode, any day of the week, the workdays, the weekend days, or the
whole week can be configured in combination with the programmed switch-points.
When pressing buttons "UP" and "DOWN", the symbols of the selected day(s) are
displayed.
Press the "PROG" button to exit setting mode and save the new settings.
Day of the week:
Workdays:
Weekend days:
Switch-point settings
In the right-hand corner of the display, the current switch-point to be set is shown.
First, set the desired activation time. Then press the "PROG" button.
Set the desired room temperature for the set activation time. Press the "PROG"
button.
40
Mo, Tu, We, Th, Fr, Sa, Su
Mo, Tu, We, Th, Fr
Sa, Su