Package Contents; Explanation Of Symbols And Signs - VOLTCRAFT VC-12A Bedienungsanleitung

Package Contents

Multimeter with built-in spare fuse
Safety measuring leads red and black
1 mignon battery
Operating Instructions

Explanation of symbols and signs

OFF
COM/-
+
AC
DC
V
mA
Ω
x1K
dB
BAT
REPLACE/BAD The battery must be replaced
?
GOOD
Overload, the measuring range was exceeded
Symbol for the acoustic continuity tester
Symbol for the integrated fuse
Switch position OFF
Measurement reference potential, - for DC
Measurement measurement potential, + for DC
Wave parameter for voltage
Direct magnitude for voltage and current
Volt (unit of electric voltage)
Milliampere (unit of electric current, exp.-3)
Ohm (unit of electrical resistance)
The resistance value read has to be
multiplied by 1,000
Attenuation in the AC voltage measurement circuit
(0 dB = 1 mW/600 Ohm = 0.775 V)
Battery test
The battery should be replaced as soon as possible
The battery may be used
37