Inserting And Changing The Battery - VOLTCRAFT VC-12A Bedienungsanleitung

To clean the device, the display or measurement lines, use a clean, dry
lint-free anti-static cleaning cloth.
Inserting/changing the batteries
To use the measuring instrument, a battery the mignon (AA) type, con-
tained in the delivery, is required.
Insert a new battery:
• when using for the first time,
• when an acoustic continuity test is no longer possible, or
• when a zero adjustment in the resistance measuring range can no
longer be performed.
Proceed as follows, to insert or change the batteries:
- Remove all measuring leads and turn the multi-
meter off.
- Loosen the screw on the rear of the battery
compartment and carefully remove the cover (7)
of the battery compartment by pulling it back-
wards. Note! It is not a sliding cover.
- Insert new batteries as shown into the multime-
ter. Look for the plus and minus symbols in the
battery tray.
- Close the cover carefully.
+
AA
47