VOLTCRAFT VC-12A Bedienungsanleitung Seite 41

displayed. The built-in protective diode blocks the reading. Stop the
measurement and repeat the measurement with the correct polarity.
Read off the measured value on the scale „DC".
- After completing the measurement, remove the measuring tips from
the measuring circuit and switch the multimeter off (rotary switch posi-
tion: „OFF").
Proceed as follows to measure AC voltages:
- Select the measuring range V
- Connect the black measuring line to the COM socket (5) and the red
measuring line to the V socket (6).
- Now perform the zero adjustment.
- Now connect the two measuring probesto the object to be measured
(generator, switch etc.).
- Read off the measured value on the scale „AC".
- After completing the measurement, remove the measuring tips from
the measuring circuit and switch the multimeter off (rotary switch posi-
tion: „OFF").
40
with the rotary switch .