Product Description - VOLTCRAFT VC-520 Bedienungsanleitung

If you have a reason to believe that the device can no longer be operated safely,
disconnect it immediately and secure it against being operated unintentionally. It
can be assumed that safe operation is no longer possible if:
- the device is visibly damaged,
- the device no longer works
- the unit was stored under unfavourable conditions for a long period of time or
- if it has been subjected to considerable stress in transit.
Do not switch the measuring instrument on immediately after it has been taken from
a cold to a warm environment. Condensation that forms might destroy your device.
Leave the device switched off and wait until it has reached room temperature.
Only undertake current measurements when there are no measuring leads connected
to the device.
Use extreme caution when measuring electrical rails and non-isolated conductors - there
is a risk of electrical shock. Wear protective clothing (e.g. gloves etc.) in accordance with
safety requirements to avoid injury as a result of electrical shock, arcing etc.
Do not leave the packaging material lying around carelessly since such materials
can become dangerous toys in the hands of children.
Do not work alone if possible, to allow help to be available if required.
You should also heed the safety instructions in each chapter of these instructions.

Product Description

The measured values are displayed on the clamp meter by the digital display. The
measuring value display of the clamp meter comprises 4000 counts (count = small-
est display value).
The clamp meter can be used for hobby or professional applications.
The clamp meter allows you to measure currents up to 400A without needing to
interrupt the conductor to be measured.
33