Product Description - VOLTCRAFT VC-20 Bedienungsanleitung

Product description

The multimeter (referred to as DMM in the following) indicates mea-
sured values on the digital display. The DMM measured value dis-
play comprises 4,000 digits (digit = smallest display value).
The individual measuring ranges are selected via the rotary switch in
which „auto range", the automatic range selection, is active. The
appropriate range of measurement is set for each application individ-
ually.
The automatic cutoff is always active in order to protect the batter-
ies of the measuring device. If no button is pressed for 15 minutes,
the DMM shuts off automatically. To reactivate the device, press
„MODE", „Hz %" or actuate the rotary switch.
The current range has an exceptional feature. With this measuring
device, it is no longer necessary to replace a fuse that has acciden-
tally tripped. The installed fuse resets automatically after tripping.
The measuring leads are permanently attached to the measuring
device. The test prod holder on the rear allows you to use the device
with one hand only and serves to conveniently stow away the test
prods. The gummed housing and IP54 protection make the DMM
ideally suited for heavy-duty measuring tasks.
The device is powered with two AAA batteries. These are supplied
with the device.
The measuring device can be used for hobby or professional appli-
cations.
38