Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning and Maintenance
Warning! Unplug unit before servicing.
NOTICE: To ensure the effectiveness of the dehumidifier, keep the filter, coils and the air inlet and
outlet clean. To reassemble, follow the steps below in reverse.
① Remove the drain hose from the drainage outlet.
② Remove the vent hose if connected.
③ Take out the filter, clean and wash the filter.
④ Use a soft cloth to gently wipe the outer case to remove dust.
⑤ Remove the housing (unscrew the bolts shown on each panel).
⑥ Vacuum clean the dust on the coils, take care not to damage the fins.
NOTICE: Protect the sensors from impact and do not expose them to water.
64
Werbung
Inhaltsverzeichnis
Fehlerbehebung
