Maintenance; Disposal Of The Product - ecofort ECODRY 425 Handbuch

Pic.5 – The control panel
Pic.6 – Air flow
4
both the green light S1 and the display D blink.
The defrosting cycle
If the temperature goes below 16°C ice may form on the evaporator: le electronic board automatically
performs the defrosting cycle to melt the ice and keep free the air flow even at lower temperatures.
Failures
The display is used by the electronic device to show particular situations (Tab.B). If an error message is
displayed please contact your dealer for repair.
Positioning
The dehumidifier must be simply placed in the room to be dehumidified and started. To obtain maximum
efficiency keep to the following rules:
• make sure that in the room, where the dehumidifier is installed, the conditions never exceed the
working limits of the machine (Tab.D);
• the room where the dehumidifier is installed must be closed;
• it is advisable to place the dehumidifier in the coldest point of the room, where normally the humidity
level is higher, possibly near the power socket.

Maintenance

These dehumidifiers need no particular maintenance. It is advisable to dust them and keep the air intake
and outlet grids clean. Contact your dealer if it should function badly or breakdown. The power supply
cable has an M type connection; in the event of damages the cable must be replaced with a similar one
only by experienced and qualified staff.
!
WARNING: before doing anything on the appliance disconnect the power supply by
unplugging the machine.
Storage
• Keep the appliance in a room with a temperature between –25°C and +55°C.
• When the appliance is still packed keep to the instructions on the box.
• Do not place other heavy material on the box.
What to Before a long period of inactivity
• Disconnect the plug and empty the condensate collection tank;
• cover the machine to protect it from dust.
What to do After a long period of inactivity
• The fan must turn freely without gripping;
• put the machine working following this manual's instructions.

Disposal of the product

Applicable in European Union countries only.
The crossed-out rubbish bin symbol indicates that the product must be collected separately from other
waste at the end of its useful life. The user must therefore take the appliance at the end of its useful life to a
special centre for electrical and electronic waste collection or hand it back to the retailer on purchasing a
new product of an equivalent type, on a one-for-one basis.
Proper segregated waste collection of old appliances for subsequent recycling, treatment and environmen-
tally compatible disposal helps avoid possible negative effects on the environment and health and favours
recycling of the materials the product is made of.
Improper disposal of the product by the user entails administrative sanctions provided for in the legisla-
tion of individual countries.
Dehumidifier
Display Description
n Temperature probe must be checked
u Humidity probe must be checked
Tab.B – Error messages
E N G L I S H