Purge
Press the PURGE button, the unit will pump for 50 seconds to manually empty water from the
condensate pump reservoir.
During normal operation, the pump purges 90 seconds when the reservoir is full. The display will
flash P in the top right corner.
NOTICE: Always press the PURGE button prior to moving the unit. Whenever the
dehumidification is switched off, the purge function will engage automatically to empty the
tank.
Display Menu
Press the DISPLAY MENU button to cycle through the displays of additional dehumidifier
conditions and user settings. To return to the main menu, wait for 10 seconds or repeat pressing
DISPLAY MENU button until it will be back to the main menu.
Menu Selection
Press the MENU SELECTION button to change / check the value of the User Settings. The MENU
SELECTION button acts as the UP button for adjusting the set value for humidistat mode
operation.
User Settings
NOTICE: User settings can only be made when the compressor is running, not in standby mode.
The User can use
set some functions. Each press of
parameter (see list below). When you reach the parameter you wish to adjust, press the
MENU SELECTION button. The arrow
parameter, or the screen is locked now. Press DISPLAY MENU button
interface.
DISPLAY MENU and
DISPLAY MENU button, it will show the next
shown in top left corner means you can adjust the
61
MENU SELECTION buttons to check and
to exit the locked