Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Electric Wiring Diagram; Disposal Of The Product - ecofort ECODRY 625 Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

M1276-0

Maintenance

The dehumidifiers of the ECODRY series need no particular mainte-
nance. It is advisable to dust them and keep the air intake and outlet
grids clean. Contact your dealer if it should function badly or break-
down.
B
This appliance contains flammable pressurized
refrigerant: any maintenance concerning the
refrigerant circuit must be carried out by technical
personnel who have a valid certificate issued by
an accredited organization, which certifies their
competence to operate safely with this type of
refrigerants.
The power supply cable has an M type connection; in the event of dam-
ages the cable must be replaced with a similar one only by experienced
and qualified staff.
E
Maintenance on the electrical or mechanical parts
must be carried out taking into account the flam-
mable refrigerant fluid. Before intervening, make
sure you have eliminated all possible ignition sources,
check that the capacitors are discharged, that there
are no live parts, that the appliance is properly con-
nected to earth.
• The refrigerant fluid is odourless: if you suspect that there is a re-
frigerant gas leak, properly ventilate the room before doing anything
else.
E
ATTENTION: before doing anything on the appli-
ance disconnect the power supply by unplugging the
machine..
Storage
• Keep the appliance in a room with a temperature between –25°C and
+55°C.
• When the appliance is still packed keep to the instructions on the
box.
• Do not place other heavy material on the box.
Check-up to carry out before and after a
long period of inactivity
Before
• Disconnect the plug and empty the condensate collection tank.
• Cover the machine to protect it from dust.
After
• The fan must turn freely without gripping.
• Put the machine working following this manual's instructions.

Disposal of the product

Applicable in European Union countries only. The crossed-out rubbish
bin symbol indicates that the product must be collected separately from
other waste at the end of its useful life. The user must therefore take the
appliance at the end of its useful life to a special centre for electrical and
electronic waste collection or hand it back to the retailer on purchasing
a new product of an equivalent type, on a one-for-one basis.
Proper segregated waste collection of old appliances for subsequent re-
cycling, treatment and environmentally compatible disposal helps avoid
possible negative effects on the environment and health and favours re-
cycling of the materials the product is made of.
Improper disposal of the product by the user entails administrative
sanctions provided for in the legislation of individual countries..

Electric wiring diagram

Ref.
1
2
3
4
5
6
7
8
9
ENGLISH
Pic.8 – Electric wiring diagram
Electronic power device
Temperature probe
Electronic control panel
Electronic humidistat
10 poles cable with plugs
4 poles cable with plug
Tab.D – Wiring diagrams references
Description
Fan
Compressor
Level switch
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis