Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
The ecoQ HumidAir E250 evaporative humidifier is ready to use by simply adding
water, connecting to power outlet and then turn on.
3 Options to Add Water
1. Remove cover and add water as shown in the picture below.
2. Add water into tank directly, there is no need to remove the cover.
3. Remove the cover and fill the tank with water.
Option 1
Cleaning & Maintenance
1. Clean the device by wiping
24
|
Manual HumidAir E250/E250+
max
upper limit
Note: Do not add water over the max line.
it with a clean, soft and wet
cloth.
Attention: For your more comfortable experience, it is
recommended to change the filter every 1-2 months.
max
upper limit
clear water
Option 2
2. Add softening agent and
clear water
Option 3
follow its instructions.
Rinse thoroughly after
cleaning.
max
upper limit
Werbung
Inhaltsverzeichnis
