Before Operating - ecofort ecodry Pro 35C Bedienungsanleitung

Before Operating

Placement
For best results, operate your dehumidifier in an enclosed area. Close all doors and windows to
the outside to maximize the unit's water removal efficiency. Also, keep traffic through the drying
room to a minimum. Place the unit against the wall, away from obstructions and keep it away
from anything that could block airflow into and out of the unit.
Place Unit Upright
Always transport and place the machine in upright position, if the machine was tilted on its side
or upside-down during transportation, the liquid from the compressor flows into the refrigerant
coils reducing the ability of the dehumidifier to function. Letting the dehumidifier stand upright
for at least 1 hour allows the liquid to flow back into the compressor. The machine must be
positioned upright on a level surface during use.
Connect the Drain Hose
The machine is equipped with a drain hose. This hose is equipped with a quick-connect fitting for
quick attachment. Unwrap the entire hose and place the unattached end in a sink, drain, bucket
or outside - anywhere the water can drain out safely. If you use a bucket or other receptacle for
water collection, check it regularly to prevent spills.
NOTICE: Uncoil and straighten the entire drain hose. Do not leave any part of the hose coiled on
the machine and do not place the end of the hose higher than 3.5 meters. Also check for kinks, or
obstructions that would restrict the flow of the water. Failure to do so may cause a water backup
in the pump resulting in leakage.
57