LD Systems IMA 120 Bedienungsanleitung Seite 7

ATTENTION:
1. Do not install or operate the appliance near any radiators, heat registers, stoves or other
heat sources. Ensure that the device is always installed in such a way that it is sufficiently
cooled and cannot overheat.
2. Do not place ignition sources such as burning candles near the appliance.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or impact to the unit.
6. Observe the IP protection class as well as the ambient conditions such as temperature
and humidity according to the specification.
7. Devices can be constantly further developed. In the event of deviating information on
operating conditions, performance or other device properties between the user manual
and the device labelling, the information on the device always takes priority.
8. The unit is not suitable for tropical climates and for operation above 2000 m above sea
level.
9. Unless explicitly stated, the unit is not suitable for operation in marine conditions.
CAUTION:
Connecting signal cables can cause a lot of noise. Make sure that devices connected
to the output are muted when plugged in. Otherwise, noise levels may cause damage.
PLEASE NOTE:
For conversion or retrofit sets or accessories provided by the manufacturer,
it is essential to observe the instructions included.
CAUTION: HIGH VOLUME AUDIO PRODUCTS!
This device is designed for professional use.
The commercial operation of this device is subject to the applicable national regulations and
guidelines for accident prevention.
Hearing damage due to high volume and continuous exposure: Use of this product may
produce high sound pressure levels (SPL) which may cause hearing damage. Avoid exposure
to high volumes.
7