Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
5
Operation
•
Connect the device (BSZ-H) with the lifting device / carrier such as diggers or truck loading cranes.
•
Clean the rubber grippers before using the device and check them for abrasion.
•
Clean absolutely heavily dirty gripping goods at the working surfaces of the rubber grippers before
the gripping procedure!
•
Deposit the device (BSZ-H) centric on the gripping good. Take care, that the rubber tops seats on the gripping
good (→ Fig. A)
•
Lift the device (BSZ-H) careful with the support frame, so that the device clamps of the device close themselves.
•
A constant load distribution and a optimum cohesion of the rubber grippers is a indispensable supposition for a
secure operation with the device and must be checked anytime.
•
Transport the device with the gripped load careful to the place of destination.
•
Deposit the gripping good with the device on the ground. Lift the device and it opens automatically, the automatic
release locks, so that the device can be lifted without the gripping good.
Rubber top
56400002
15 / 20
Rubber top
Fig. A
GB
Werbung
Inhaltsverzeichnis
