Operation - probst 53100420 Betriebsanleitung

Operation

6 Operation
•
Connect the device to the hoisting device/carrier as described in chapter "Installation of the lifting eye".
•
Move the device to the material to be gripped.
•
Position the device centrally in the gripping good (cable channel) and lower it.
•
The device can now be lifted with the gripping good (cable channel). It must be ensured that the rubber
grippers are in full contact with the gripping surfaces of the gripping good! Fig. 1
•
The device opens automatically when the gripping good is set down.
53100420
Fig. 1
13 / 17 GB