Husqvarna 1-8DPF40 Bedienungsanweisung Seite 14

Abrasive separator
The abrasive separator makes the abrasive free
from contamination. The abrasive separator holds the
abrasive and supplies the blastwheel with abrasive.
The separator tray keeps contamination away from the
abrasive and the blastwheel.
To fill the product with abrasive
WARNING:
protective equipment during operation. Refer
Personal protective equipment on page 6 .
to
1. Close the abrasive valve. Refer to
abrasive valve on page 12 .
14
Always use personal
To operate the
2. Unlock the cover and lift the handle to open the
separator.
3. Open the separator tray and remove all
contaminations when you fill abrasive or when it is
necessary.
4. Fill the separator with abrasive up to the separator
tray. Fill abrasive when it is necessary.
To connect a dust extractor
WARNING:
extractor if the dust extractor hose is
damaged. The risk increases that you
breathe in dust that is dangerous to your
health. Use approved respiratory protection.
1. Examine the dust extractor hose for damages.
2. Make sure that the filters in the dust extractor are
clean and not damaged.
Do not use the dust
2124 - 001 - 13.04.2023