Torch Function; Bluetooth ® Mode "Ble - VOLTCRAFT VC891 Bedienungsanleitung

12.10 Torch function

The multimeter features two integrated white LED lamps. These LED lamps serve
as torches.
Pressing the button with the torch symbol activates the torch function. The function
buttons "F1" to "F4" can also be used to activate this function.
F1 TORCH
F2 FRONT
F3 BACK
F4 EXIT
12.11 Bluetooth
The integrated Bluetooth
meter to a smartphone or tablet for their subsequent limited control.
This mode is compatible with smartphones or tablets with a Bluetooth
face. The app "Voltcraft VC800-Series" is available free of charge at "Google Play"
or in the "App Store" from Apple and must be installed before you can use it.
Install the app on your smartphone or tablet.
Activate the Bluetooth
Activate the Bluetooth
"BLE" for approx. 2 seconds. When the interface is enabled, you will hear a confir-
mation beep and the Bluetooth
line.
Open the app on your smartphone or tablet and create a new project by tapping on
the large "plus sign" in the middle of the screen. Select your meter "VC891" from
the list of available devices. A chain symbol displayed next to the interface symbol
indicates that the meter is connected with the app. Measurement data can now be
transferred. Measurement data are transferred from the meter to the app for their
subsequent limited control. The knob function cannot be controlled!
For operation and configuration in the app, please refer to the separate app
operating instructions.
This is available under the listed URL in the chapter „Latest product information".
82
activates the torch function
activates the LED lamp on the front side
activates the LED lamp on the rear side
exits the torch menu
mode "BLE"
®
interface allows transferring measurement data from the
®
mode on your smartphone or tablet.
®
mode on the meter. To do this, press and hold the button
®
symbol
®
will be displayed on the left in the top
LE 4.0 inter-
®