Torch Function - VOLTCRAFT VC891 Bedienungsanleitung

Device Info

12.10 Torch function

The multimeter features two integrated white LED lamps. These LED lamps serve
as torches.
Pressing the button with the torch symbol activates the torch function. The function
buttons "F1" to "F4" can also be used to activate this function.
F1 TORCH
F2 FRONT
F3 BACK
F4 EXIT
12.11 Bluetooth™ mode "BLE"
The integrated Bluetooth™ interface allows transferring measurement data from the
meter to a smartphone or tablet for their subsequent limited control.
This mode is compatible with smartphones or tablets with a Bluetooth™ LE 4.0 inter-
face. The app "Voltcraft VC800-Series" is available for free download from Google
Play Store or Apple App Store and must be installed before you can use it.
Install the app on your smartphone or tablet.
Activate the Bluetooth™ mode on your smartphone or tablet.
Activate the Bluetooth™ mode on the meter. To do this, press and hold the but-
ton "BLE" for approx. 2 seconds. When the interface is enabled, you will hear a
confirmation beep and the Bluetooth™ symbol
the top line.
Open the app on your smartphone or tablet and create a new project by tapping on
the large "plus sign" in the middle of the screen. Select your meter "VC891" from
the list of available devices. A chain symbol displayed next to the interface symbol
indicates that the meter is connected with the app. Measurement data can now be
transferred. Measurement data are transferred from the meter to the app for their
subsequent limited control. The knob function cannot be controlled!
80
System information display
activates the torch function
activates the LED lamp on the front side
activates the LED lamp on the rear side
exits the torch menu
will be displayed on the left in