Back Light Function (Only In Vc155); Torch Function (Only In Vc155); Maintenance And Cleaning - VOLTCRAFT 12 44 55 VC135 Bedienungsanleitung

BACK LIGHT FUNCTION (ONLY IN VC155)

During any measurement, press the BACK LIGHT button (12) to turn on the back light on the display (4).
Press it again to turn it off.

TORCH FUNCTION (ONLY IN VC155)

During any measurement, press the torch button (11) to turn on the torch light (3). Press it again to
turn if off.

MAINTENANCE AND CLEANING

Never operate the measurement device when it is open.
RISK OF FATAL INJURY!
a) General
To ensure the accuracy of the multimeter over an extended period of time, it should be calibrated
once a year.
Apart from occasional cleaning and fuse replacements, the multimeter requires no servicing.
Information on changing the battery and fuse appears below.
Regularly check the technical safety of the instrument and measuring lines, e.g.
check for damage to the housing or squeezing etc.
b) Cleaning
Live components may be exposed if covers are opened or parts are removed.
The connected lines must be disconnected from the measuring device and all
measuring objects prior to cleaning or repairing the device. Switch the DMM off.
Do not use any carbon-containing cleaning agents or petrol, alcohol or the like to clean the product.
These could corrode the surface of the measuring instrument. Furthermore, the fumes are hazardous
to your health and explosive. Moreover, you should not use sharp-edged tools, screwdrivers or metal
brushes or similar for cleaning.
For cleaning the device or the display and the measuring lines, use a clean, fuzz-free, antistatic
slightly damp cloth.
34