Operator Control; Switching On And Off; Operating The Brakes - Vermeiren Sedna Gebrauchsanweisung

• Be aware of other road users to whom your scooter may be an obstacle. Pay special attention
when turning, reversing or driving backward. If you are not acquainted with driving backwards,
first practice in an open area. Indicate the direction you intend to go before cornering.
• When driving indoors, only use the lowest speed setting.
• Do not turn your scooter "OFF" while driving as this will lead to an emergency stop and possible
risk of accident and injury.
• Keep the braking distance in mind, see also the technical specification in chapter 6. Be aware
that the braking distance depends on speed, surface, weather conditions, slope and weight of
the user.
• Pay attention if the road has holes or gaps that may cause entrapment of the wheels.

3.2.1 Operator control

3
5
1
4
2

3.2.2 Switching on and off

Switching ON with ON/OFF
switch (2)
Switching OFF with ON/OFF
switch (2)
Switching automatically OFF
(time)

3.2.3 Operating the brakes

To apply the electromagnetic brakes:
1. Let go of the speed lever (5 or 7). The electromagnetic brake in the motor will be activated,
the scooter will stop.
6
7
8
Put the key in switch (2) and turn it clockwise (ON).
The status indicators (3) light up for some seconds when the key is turned
(during self-test). Battery indicator (6) stays visible. See also §3.2.
Turn the key in switch (2) counter clockwise (OFF) and remove the key.
The lights of status indicator (3) extinguish.
The scooter will be switched off automatically if it hasn't been used for 30
minutes. To start the scooter again:
•
Turn the key counter clockwise.
•
Remove the key from the ON/OFF switch (2).
•
Put the key back in the switch.
•
Turn the key clockwise (ON).
11
2023-05
Using your scooter
1. Hand grip
2. ON/OFF switch
3. Error indicator
4. Signal push button
5. Operating-lever left
(drive backward)
6. Battery indicator
7. Operating-lever right
(drive forward)
8. Speed control
EN
Sedna
NL