Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13.1 Indicating system information
To indicate the type of unit and the version of the
operating software used and to indicate and change
the MAC address of the recorder:
1) Activate the submenu
INFO/ SYSTEM INFORMA-
TION
(fig. 48) from the submenu
SETUP
(fig. 11).
Submenu SYSTEM INFORMATION
2) Next to
DEVICE TYPE
, the internal device identifi-
cation will be indicated; next to
SION
, the version of the operating software used
by the recorder will be indicated.
3) In the input field next to
MAC ADDRESS
Access Control Address), the hardware address
of the recorder (6 bytes in hexadecimal format)
will be preset for unambiguous identification of
the recorder in a computer network (Ethernet). It
may be changed, if required (detailed description
of an input
chapter 6.2.3).
4) To store a
MAC AD DRESS
that has been changed,
click the button
APPLY
, then confirm the message
inserted "
Saved successfully!
button
OK
.
5) To exit the submenu, click the button
right mouse button or press the button MENU /
ESC (7) or MENU (32).
14
Remote Access via
Computer Network
Via its connection jack LAN (23), it will be possible to
connect the video recorder to an individual com-
puter, to a local computer network or, e. g. via a
SYSTEM/ SYSTEM
router, to the Internet. For correct configuration,
comprehensive knowledge of computer network
technology will be essential.
14.1 Setting up a network connection
1) Activate the main menu (
2) Activate the submenu
(fig. 49).
SOFTWARE VER-
(Media
Submenu NETWORK SETUP
3) For
TYPE
, select the type of network connection:
DHCP
STATIC
" by clicking the
EXIT
or the
PPPOE
4) Enter the parameters (
ADDRESS
,
SUBNET MASK
for the type of network connection selected
(detailed description of an input
6.2.3).
5) For remote access, the IP address of the recorder
must be known. However, many Internet providers
change it each time a connection is made
(dynamic IP address). To solve this problem, use
a DDNS server, i. e. a network service offered by
several service providers. After registration with a
service provider, you will select a definite subdo-
main for addressing the recorder and a user name
and a password for access. If the DDNS service
provider "
dyndns
for example, "
Use of this service will usually be configured in
the router connecting the recorder to the Internet,
but will also be possible with the recorder.
Each time a connection is made, the router or
recorder will send its current IP address to the
DDNS server which will store it and accordingly
route any queries made to the subdomain to the
recorder.
To configure the recorder for using a DDNS
server, click the button
menu
NETWORK SETUP
SETUP
, fig. 50 will appear. In the list field next to
DDNS, define if the DDNS function of the
recorder is to be used (
service provider in the list field next to
the input fields, enter the parameters defined
(
HOST NAME
registration with the service provider.
MAIN MENU
, fig. 10).
NETWORK
/
NETWORK SETUP
Dynamic Host Configuration Protocol
a DHCP server (e. g. a router) will
assign the network configuration to
the recorder
the network configuration (
IP
ADDRESS
,
SUBNET MASK
,
GATEWAY
will be manually defined in the
recorder
Point-to-Point Protocol over Ethernet
e. g. for a direct Internet connection
via DSL modem; the access data
(
PPPOE NAME
,
PASSWORD
) will be
made available by the Internet
service provider
PORT
,
WEB PORT
,
,
GATEWAY
,
DNS
) required
chapter
" is used, the subdomain may be,
example.dyndns.org
".
DDNS SETUP
in the sub-
. The submenu
DDNS
ON
) or not (
OFF
). Select the
SERVER
,
USERNAME
and
PASSWORD
) during
Submenu DDNS SETUP
Example: dynamic IP via "dyndns"
6) To reset all settings of this submenu to the factory
settings, click the button
7) To store the settings, click the button
confirm the message inserted "
fully!
" by clicking the button
Note: Changes of the network parameters will
not become effective until the recorder has been
restarted.
8) To exit the submenu, click the button
right mouse button or press the button MENU /
ESC (7) or MENU (32): If changes have been
made, a message will appear announcing the
restart of the recorder. Click the button
confirm.
14.2 Remote control via the programs Win-
dows Internet Explorer or 9D-VIEWER
Via the network, the programs Windows Internet
Explorer (IE) or the 9D-VIEWER provided will be
)
able to access the recorder in order to display live
images of the cameras or to replay recordings
regardless of the view selected on the recorder. Fur-
thermore, it will be possible to change settings of the
recorder.
When the first connection is made via the IE, after
entering the IP address of the recorder (or the pub-
lic IP address of the router to which the recorder has
been connected) in the address bar, the IE will load
an extension required (ActiveX control element)
IP
from the recorder and will install it on the computer.
If necessary, relax the security settings of the IE to
allow this process.
As an alternative to operation via the IE, use the
program 9D-VIEWER. This program is supplied on a
CD with the recorder and offers the same possibili-
ties as operation via the IE. To install, start the pro-
gram "D9-PCviewer-en.exe" and follow the instruc-
tions on the screen. After installation, start the
program file "D9-VIEWER.exe".
After starting or after making the connection, the
window "USER LOGIN" (fig. 51) will appear.
Window "USER LOGIN" for remote access
1) For "IP ADDRESS", enter the IP address of the
recorder (already entered in the IE) or the public
IP address of the router to which the recorder has
been connected.
. In
2) For "MEDIA PORT", enter the port number
entered in the input field
NETWORK SETUP
of the recorder (
fig. 49).
Windows is a registered trademark of Microsoft Corporation in the U.S.A. and
other countries.
GB
DEFAULT
.
APPLY
, then
Saved success-
OK
.
EXIT
or the
OK to
PORT
in the submenu
chapter 14.1,
35
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
