Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
12
Password Protection
To protect the recorder against unauthorized
change of menu settings, it will be possible to acti-
vate a two-stage password protection.
With the user password, it will be possible to
access the submenu VIDEO SEARCH (
to replay recordings or to export video files. Further-
more, remote control of the camera (
will also be possible.
For all other settings in the menu, knowledge of
the administrator password will be essential.
12.1 Configuring the password protection
To configure the passwords:
1) Activate the main menu (
2) Activate the submenu
SYSTEM
(fig. 11).
3) Activate the submenu
PASSWORD
SETUP
(fig. 45).
Submenu PASSWORD SETUP
4) In the input field
DEVICE ID
OOOOOO
can usually be maintained as a device
number. If the number is modified, you will have
to remember it later when entering the password
for operating the recorder.
5) In the list field next to
PASSWORD ENABLE
a password protection is to be used (
OFF
(
).
6) If
ON
has been selected, enter a 6-digit number to
be used as a user password in the input field next
to
USER PASSWORD
(detailed description of an
input
chapter 6.2.3). To confirm it, repeat this
CONFIRM
number next to
Enter a 6-digit number to be used as an
administrator password in the input field next to
ADMIN PASSWORD
. To confirm it, repeat this num-
ber next to
CONFIRM
and memorize it well!
7) To store the settings, click the button
confirm the message inserted "
fully!
" by clicking the button
8) To exit the submenu, click the button
right mouse button or press the button MENU /
ESC (7) or MENU (32).
34
12.2 Activating the password protection
To activate the password protection after exiting the
setting menu:
1) Activate the menu list (fig. 8) [click the right
mouse button or press the button PTZ (16), SEL /
chapter 9)
EDIT (9) or SEL (33)].
2) Activate the list entry
chapter 11)
it with the buttons
with the button SEL / EDIT (9) or SEL (33)].
If the main menu, the submenu item VIDEO SEARCH
or
PTZ
will appear.
MAIN MENU
, fig. 10).
/
SYSTEM SETUP
/
PASSWORD
Window USER LOGIN
To gain access:
1) Enter the device number in the input field
ID
: (detailed description of an input
ter 6.2.3). The preset number 000000 may be
maintained if it has not been changed in the sub-
menu
chapter 12.1).
2) Enter the user password or administrator pass-
word in the input field
3) Click the button
access corresponding to the password will be
granted.
the message "
, the preset value
pear; if the password is incorrect, the message
Incorrect password!"
"
and accept it with
Note: If the user password was entered to activate
, define if
the submenu
ON
) or not
"
Limited Authority!
menu item is selected. To be able to enter the
administrator password for access to the menu item
desired, it will be necessary to exit the menu first and
to select the item
.
APPLY
, then
Saved success-
OK
.
EXIT
or the
MENU LOCK
[click it or select
and
(8 or 29) and confirm
is activated, the window
USER LOGIN
PASSWORD
/
PASSWORD SETUP
PASSWORD
:.
APPLY
. If the input is correct,
If the input of the device number is incorrect,
Device number error!
will appear.
Confirm the message with
OK
, correct the input
APPLY
.
VIDEO SEARCH
PTZ
or
, the message
" will appear when another
MENU LOCK
from the menu list.
13
System Maintenance
In the submenu SYSTEM MAINTAIN, it will be pos-
sible to reset the recorder to the factory settings, to
update the firmware (operating system of the
recorder) or to restart the recorder manually or auto-
matically at regular intervals.
1) Activate the main menu (
2) Activate the submenu
(fig. 11).
3) Activate the submenu
TAIN
(fig. 47).
(fig. 46)
DEVICE
chap-
Submenu SYSTEM MAINTAIN
4) In the list field next to
(
fig. 45,
the recorder is to be restarted at regular intervals
ON
OFF
(
) or not (
When the recorder is restarted regularly, it
may be possible e. g. to detect a defective hard
disk and to report the defect.
5) If
ON
has been selected, define next to
REBOOT
if the restart is to made
EVERY WEEK
or
time and, if required, the day or day of the week.
" will ap-
6) To restart the recorder manually, click the button
REBOOT
and click
appearing. To abort the process, click
7) To reset the recorder to the factory settings, click
the button
LOAD DEFAULT
firmation prompt pointing out that all settings
made by the user will be lost. To abort the
process, click
CANCEL
8) Via the button SYSTEM UPDATE, it will be pos-
sible to load a new operating software on the
recorder from a storage medium connected to the
USB port
tem information will be described in the chapter
below (
chapter 13.1).
9) To reset all settings of this submenu to the factory
settings, click the button
10)To store the settings, click the button
confirm the message inserted "
fully!
" by clicking the button
11)To exit the submenu, click the button
click the right mouse button or press the button
MENU / ESC (7) or MENU (32):
MAIN MENU
, fig. 10).
SYSTEM
/
SYSTEM SETUP
MAINTAIN
/
SYSTEM MAIN-
AUTO MAINTAIN
, define if
).
AUTO
EVERY DAY
EVERY MONTH
. Then define the
OK
in the confirmation prompt
CANCEL
.
and click OK in the con-
.
(22). Indication of the current sys-
DEFAULT
.
APPLY
, then
Saved success-
OK
.
EXIT
or
,
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
