Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
4) To exit the submenu, click the button
right mouse button or press the button MENU /
ESC (7) or MENU (32).
8.1.1
Configuring / deleting the hard disk
DEVICES/ DEVICE MANAGE-
1) Activate the submenu
MENT
(fig. 22) in the main menu (fig. 10).
㉒
Submenu DEVICE MANAGEMENT
2) Activate the submenu
(fig. 23).
㉓
Submenu HDD MANAGEMENT
In the line
HDD STATUS
, the status of the hard disk
will be indicated.
OK
: The hard disk is ready for recording.
No Disk Found
: No hard disk installed.
Not Formatted
: The hard disk has not been for-
matted or has not been correctly formatted. (The
recorder will use its own format which is not com-
patible to the usual formats for computers.)
In the line
TOTAL SPACE
capacity will be indicated; in the line
the free storage space will be indicated.
The line
USEABLE REC. TIME
recording time, depending on free storage space
and the recording quality and resolution set in the
submenu
RECORD
/
RECORD SETUP
fig. 21).
3) If the hard disk has not been formatted for use in
this recorder or if all recordings previously made
are to be deleted (it will not be possible to delete
individual recordings from the hard disk), click the
HDD FORMAT
button
.
To start formatting, click
prompt pointing out that formatting will delete all
data on the hard disk. To abort the procedure,
CANCEL
click
.
After successful formatting, confirm the mes-
sage "
Formatted successfully!
Now the recorder will be restarted automati-
cally. Then reactivate this submenu
MANAGEMENT
(fig. 23).
OVERWRITE
4) In the line
, define if the oldest record-
ings are to be overwritten automatically (
DISABLE
or not (
) when the hard disk is full.
5) To reset all settings of this submenu to the factory
settings, click the button
28
EXIT
or the
6) To store the settings, click the button
confirm the message inserted "
fully!
7) To exit the submenu, click the button
right mouse button or press the button MENU /
ESC (7) or MENU (32).
8.2
If camera channels have generally been selected for
recording (
ways to start a recording.
8.2.1
For permanent recording of the desired camera
channels, select the option
MODE
of the submenu
ter 8.1, fig. 21) and confirm with
for which
will be recorded once the recorder has been
switched on and camera signals have been applied.
8.2.2
HDD/ HDD MANAGEMENT
It will also be possible to start a recording manually.
For this purpose, press the button REC
the recorder or
activate the item
(insertion via the right mouse button
fig. 8).
All channels set to ON in the line
submenu
fig. 21) will be recorded.
To end the recording, press the button STOP
(14) on the recorder or
or activate the item
(insertion via the right mouse button).
8.2.3
It will also be possible to control the recording auto-
matically via a schedule defined individually for each
camera channel.
1) In the submenu
ter 8.1, fig. 21) in the line
option
ton
appear. It contains a weekly schedule with the
days Sunday to Saturday in the vertical and the
hours of the day in the horizontal.
, the total hard disk
FREE SPACE
,
will indicate the
(chapter 8.1,
㉔
OK
in the confirmation
Submenu SCHEDULE
2) Next to
era channel for which a recording schedule is to
be defined. If the same schedule is intended for
" with
OK
.
all channels to be recorded, select the option
3) To enter the type of recording for each hour, tick
HDD/ HDD
off the corresponding type in the line below the
schedule and then mark the periods.
Tick off
ENABLE
)
hours when a recording is to be started in case of
alarm triggering only (detailed information con-
cerning alarm triggering can be found in the chap-
DEFAULT
.
ter below). These fields will be red.
Saved success-
" by clicking the button
OK
.
Recording control
chapter 8.1), there will be different
Permanent recording
ALWAYS
in the line
RECORD
/
RECORD SETUP
APPLY
. All channels
ON
has been selected in the line
Manual start of recording
(31) on the remote control or
START RECORD
in the menu list
CHANNEL
RECORD
/
RECORD SETUP
(
(31) on the remote control
STOP RECORD
in the menu list
Time-controlled recording
RECORD
/
RECORD SETUP
REC. MODE
TIME SCHEDULE RECORD
and click the but-
SCHEDULE
.
The submenu for the
SCHEDULE
CHANNEL
in the list field, select the cam-
ALARM
and then click all fields for the
APPLY
, then
Tick off
GENERAL
hours of permanent recording. These fields will
be green.
Tick off
NO RECORD
EXIT
or the
the hours without recording. These fields will be
black.
For operation without a mouse, first select a
field with the buttons
(13) on the recorder or
the remote control and confirm with the button
SEL / EDIT (9) or SEL (33).
4) To simplify the input, there is an additional copy
function which will allow you to copy the settings
made for a day of the week to the lines for the
other days:
REC.
In the list field next to
(chap-
corresponding day. Then select the copy target (the
day of the week or
CHANNEL
the right next to
TO
5) To reset all settings of this submenu to the factory
settings, click the button
6) To store the settings, click the button
confirm the message inserted "
(15) on
fully!
" by clicking the button
7) To exit the submenu, click the button
right mouse button or press the button MENU /
chapter 6.1,
ESC (7) or MENU (32).
in the
8.2.4
Alarm-controlled recording
chapter 8.1,
A recording can also be started by a movement
detected in the camera image or via an external sen-
sor connected to the corresponding alarm input
SENSOR (24) of the corresponding camera chan-
nel. The settings for alarm detection and the alarm
evaluation are described in chapter 10.
The requirements for starting an alarm-controlled
recording are general approval of the camera chan-
nel for recording (
video signal and selection of time-controlled record-
ing (
chapter 8.2.3) with the setting "Alarm record-
(
chap-
ing" at the time of alarm triggering.
, select the
8.2.5
Insertions during recording
In addition to flashing of the LED HDD (4), the
(fig. 24) will
recording status will be indicated via the following
icons in the corresponding camera image:
R
time-controlled recording, permanent recording
or manual recording
I
recording triggered via an alarm input
M
recording triggered via the internal motion detec-
tor
H
no start of recording because there is no hard
disk, the hard disk has not been formatted or the
hard disk is full (if the overwrite mode has been
deactivated
=
DISABLE
)
8.2.6
Storage according to type of recording
According to the start of the recording, the video
data will be stored as "alarm recording" or "normal
recording". For replay, the files can be selected
according to their type.
If an alarm is triggered via an alarm input or the
internal motion detector during a permanent or time-
ALL
.
controlled recording, the recorder will create a new
file of the type "alarm recording" on the hard disk. At
the end of the alarm recording time (
10.1,
DURATION
), recording will be continued with a
new file of the type "normal recording".
However, with a recording started manually, a file
of the type "normal recording" will be stored continu-
ously, even if in the meantime an alarm is triggered
and the icon
I
or
and then click all fields for the
and then click all fields for
and
(8),
(10) and
,
,
,
(29) on
FROM
, set the preset line of the
ALL
for all days of the week) on
. Then click the button
COPY
.
DEFAULT
.
APPLY
, then
Saved success-
OK
.
EXIT
or the
chapter 8.1), presence of a
OVERWRITE
chapter 8.1.1, step 4
chapter
M
is inserted (
chapter 8.2.5).
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
