Therabody RecoveryTherm Bedienungsanleitung Seite 4

EN Getting started
Step 2
Use your garment
1. Insert the battery into the control panel. Ensure that the Therabody logo faces outwards and the charging port is on
the bottom. Battery insertion should be seamless and not forced.
2. Press and hold the power button for two seconds to turn on the device.
3. RecoveryTherm™️ Hot Vibration Back & Core delivers heat on the front and back of your core for a customizable
360-degree heat therapy treatment. Short press the heat buttons to toggle between the three heat settings on both
the front and back. The bottom heat button controls the front, and the top heat button controls the back.
4. Add vibration to your back treatment by pressing the vibration button. Toggle between the three vibration modes (low
intensity, high intensity, and wave) by short-pressing the vibration button.
5. The treatment will automatically shut off after approximately 20 minutes. Turn the garment back on if you'd like to
repeat the treatment.
Step 3
Feel the difference.
Whether used for targeted pain management, muscle recovery, or general soreness,
RecoveryTherm™️ Hot Vibration Back & Core will help keep you feeling your best.
See Warnings for important safety instructions
4
® Every day.
Scan the QR code to get started.