For Your Safety - Cub Cadet D20 Bedienungsanleitung

Meaning of the symbols
Warning! Risk of electric shock
Never remove the power pack cover on
the device. All work on the power pack
expert.
Danger levels of warning information
The following danger levels are used in this instruc-
tion manual to indicate potentially dangerous
situations:
DANGER!
A dangerous situation is highly likely and, if
the measures are not followed, will result in
severe injury and even death.
WARNING!
A dangerous situation may occur and, if
the measures are not followed, will result in
severe injury and even death.
CAUTION!
A dangerous situation may occur and, if
the measures are not followed, will result in
slight or minor injuries.
Attention!
A possibly harmful situation may occur which if not
avoided will result in property damage.
Safety information content
DANGER!
Type and source of the danger!
Consequences of non-observation
Measure for preventing the danger
WARNING
time, read this instruction manual care-
fully and observe the instructions. Please
store away this operating manual for later
use or future owners.
Note
Always keep these symbols in a legible
condition. Replace damaged or illegible
symbols.

For your safety

Read all safety information, instructions, illustra-
tions and technical data provided with this device.
Failure to comply with the following instructions
injury. Keep all information on safety information
and instructions for future use.
The term "power tool" used in the safety informa-
tion refers to mains-powered electrical tools (with
a mains cable) and power pack-powered electrical
tools (without a mains cable).
The power-pack-powered riding mower described
in this operating manual falls under the rubric of
power tools, amongst other things, in terms of
standards. Consequently, the term "power tool",
amongst others, is used in the safety information.
safety information!
Failure to observe the instruction manual and
the safety instructions can result in damage to
the device and danger for the operator and other
persons.
Make sure that you are familiar with all controls
and how to use them correctly.
servicing of the device, must have appropriate
The making of unauthorised changes or con-
versions is not permitted
Do not make any changes to the device or convert it
to make other machinery. Such changes can result
in personal injury and incorrect operation.
Repairs to the device must only be performed
by trained persons who have been instructed to
do so. When doing so always use original spare
parts. This ensures that the safety of the device is
maintained.
EN
9