Cub Cadet D20 Bedienungsanleitung Seite 11

Safety information
Use and handling of the power tool
Do not overload the device. Use the electric
power tool designed for your work. Your work
is performed better and safer with the appropriate
Do not use a power tool with a defective
switch. An electric power tool which can no lon-
be repaired.
Keep unused power tools out of the reach of
children. Do not let any individuals use the
power tool who are unfamiliar with it or who
have not read these instructions. Electric pow-
er tools are dangerous when used by inexperi-
enced persons.
Treat power tools with care. Check that
moving parts work seamlessly and do not
jam; whether parts are so damaged that the
function of the power tool is impaired. Have
damaged parts repaired prior to using the
device. Many accidents originate from poorly
maintained electric power tools.
Keep cutting tools sharp and clean. Cutting
tools with sharp cutting edges which are treated
with care do get stuck as much.
Use power tools, accessories, insertion tools,
etc. in accordance with these instructions.
Take the work conditions and the activity to
be performed into consideration. The use of
electric power tools for applications other than
those intended may lead to hazardous situations.
Keep the handles and handle surfaces dry,
clean and free of oil and grease. Slippery han-
dles and handle surfaces do not allow for safe
operation or control of the power tool in unfore-
seeable situations.
Safety information
Service
All repairs to the power tool must be carried
with original spare parts only. This ensures
that the safety of the power tool is maintained.
Never service damaged power packs. Power
pack servicing should only ever be performed by
the manufacturer or authorised customer service
points.
Follow all the instructions on charging the
power pack in this operating manual and in
the separate operating manual of the charger.
For reasons of safety, removal and disposal
of the LI-ION power pack may only be per-
formed by a service centre.
Use and handling of the battery tool
Only charge the power packs using chargers
that are recommended by the manufacturer.
other power packs.
Only use the power packs intended for this
purpose in power tools. Use of other power
Fluid can leak from the battery if used improp-
with water in the case of accidental contact.
If the liquid comes into contact with the eyes,
also seek medical assistance. Leaking battery
pack.
or a risk of injury.
cessively high temperatures. Fire or tempera-
tures above 60°C may cause an explosion.
Follow all instructions on charging and never
charge the power pack or the battery tool
this instruction manual. Incorrect charging or
charging outside the permitted temperature range
can destroy the power pack and increase the risk
EN
-
11