Stand Alone-Mode
The respective mode can be exited via the "Quit" menu item.
CCT
ColorTemp
In Color Temp mode, you can set the color temperature.
Press the encoder and then turn the encoder until the Color Temp function is indicated in the display.
Confirm by pressing the encoder. Now you can set the desired color temperature from
1800K – 10000K by turning the encoder. Confirm by pressing the encoder.
Intensity
In Intensity mode, you can set the total brightness.
Press the encoder and then turn the encoder until the Intensity function is indicated in the display. Confirm
by pressing the encoder. Now you can set the desired brightness from 000 – 255 by turning the encoder.
Confirm by pressing the encoder.
Strobe
In Strobe mode, you can set the speed for strobe.
Press the encoder and then turn the encoder until the Strobe function is indicated in the display. Confirm by
pressing the encoder. Now you can set the desired speed from 000 – 012. Confirm by pressing the encoder.
HSI
Hue
In Hue mode, you can set the desired color.
Press the encoder and then turn the encoder until the Hue function is indicated in the display. Confirm by
pressing the encoder. Now you can set the desired color from 000 – 255. Confirm by pressing the encoder.
Saturation
In Saturation mode, the saturation of the color can be set.
Press the encoder and then turn the encoder until the Saturation function is indicated in the display. Confirm
by pressing the encoder. Now you can set the desired saturation from 000 – 255. Confirm by pressing the
encoder.
Intensity
In Intensity mode, the intensity can be adjusted.
Press the encoder and then turn the encoder until the Intensity function is indicated in the display. Confirm
by pressing the encoder. Now you can set the desired brightness from 000 – 255 by turning the encoder.
Confirm by pressing the encoder.
Strobe
In Strobe mode, you can set the speed for strobe.
Press the encoder and then turn the encoder until the Strobe function is indicated in the display. Confirm by
pressing the encoder. Now you can set the desired speed from 000 – 012. Confirm by pressing the encoder.
RGB
Red, Green, Blue, White
In the RGB mode the LEDs can be individually adjusted for brightness. The device will constantly emit the
adjusted color.
Press the encoder and then turn the encoder until the Red function is indicated in the display. Confirm by
pressing the encoder. Now you can set the desired brightness for the colors Green, Blue and White by
turning the encoder. Confirm by pressing the encoder.
23/28
00147116, Version 1.0