Herunterladen Inhalt Inhalt Diese Seite drucken

Unpacking & Installation Guide; General Safety Precautions - KULZER Pekalux POWER LED Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. Unpacking & Installation Guide
3.1 Unpacking
Take all parts of product out of the box.
Check that there are no broken or missing parts.
Preparing future upgrades and repairs, keep the original box.
Get rid of packing materials in accordance with the related regulations.
3.2 Installation Guide
 Connect the plug of power adapter to charger stand, and set the stand on a flat surface. When installed properly,
the green power indicator will be on.
 Remove the safety film of the battery contacts.
 Put the battery pack to handpiece paying attention to the direction. Alternatively you can use the DC Jack power
adapter if you prefer working with a wired device. Therefore insert the DC Jack into the handpiece and connect
with the power cord.
 Put to slide the light guide to the handpiece tightly, or it might be fall out, or can be a cause of lower output of the
power.
 Put the anti-glare shield from the point of light guide and set it on a proper position.
4. Safety Precautions

4.1 General Safety Precautions

Before using this instrument, please read its manual carefully.
Please use our original genuine parts only, or it can be a cause of damage to the product, and also, the product
could not receive warranty service.
Please keep terminals of the battery clean with a dry cotton swab, etc.
Please disconnect the plug of charger when not in use for long time.
When not in use for long time, disjoint battery and handpiece separately and keep them in a safety and clean
place.
Never carry out the ultrasonic, boiling, dry heat, Steam or cresol disinfection. It might be a serious cause of
trouble.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis