Specifications; Standard Accessories; Optional Accessories - Hitachi WH 12DAF Bedienungsanleitung

14. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery life
becomes too short for practical use. Do not dispose
of the exhausted battery.
15. Using an exhausted battery wil damage the charger.

SPECIFICATIONS

POWER TOOL
Model
No-load speed
Capacity
Tightening torque
Rechargeable battery
Weight
CHARGER
Model
Charging time
Charging voltage
Weight

STANDARD ACCESSORIES

1. Charger (UC12SD or UC24YFA) ............................... 1
2. Plastic case ................................................................ 1
Standard accessories are subject to change without
notice.

OPTIONAL ACCESSORIES

(Sold separately)
1. Battery (EB1214L, EB1220BL, EB1222HL)
M4 – M10 (High tension bolt)
Tightening is M12 high tension bolt (strength grade 12.9), when fully
charged at 20°C temp.
Tightening time: 3 sec.
EB1214L: Ni-Cd battery, 12 V (1.4 Ah, 10 cells)
EB1220BL: Ni-Cd battery, 12 V (2.0 Ah, 10 cells)
EB1222HL: Ni-MH battery, 12 V (2.2 Ah, 10 cells)
UC12SD
EB1214L: Approx. 60 min. (at 20°C)
12 V
1.4 kg
MODEL
WH12DAF: with charger and case
WH12DAF
–1
0 – 2200 min (/min)
M4 – M8 (Small screw)
M4 – M12 (Ordinary bolt)
Maximum 88 N·m {900 kgf·cm}
1.6 kg
EB1220BL: Approx. 50 min. (at 20°C)
EB1222HL: Approx. 55 min. (at 20°C)
2. Plus driver bit
Bit No.
No. 2
No. 3
English
UC24YFA
7.2 – 24 V
0.6 kg
Code No.
992671
992672
6