Transplant Distance - Checchi & Magli WOLF Bedienungsanleitung

19.0 - TRANSPLANT DISTANCE

INTER-ROW SPACING:
WOLF /2 rows - min. cm. 32 after fitting the special optional kit - max. cm. 90, or over
upon request.
WOLF /3-4-5 rows - min. cm. 50 - max. cm. 90, or over upon request.
WOLF-COMPACT - min. cm. 32 - max. cm. 45, or over upon request.
Inter-row spacing must be adjusted with the machine coupled to the tractor and with
the lift unit lowered.
Clean the hexagonal axis and the frame of any soil or other dirt, slacken the screws
(fig. 12.A), position the unit at the desired distance, sliding it along the frame. Do not
carry out these operations by hammering with metal objects, as this could cause
serious damage to the components.
SPACING BETWEEN PLANTS:
The diagram (fig. 14) shows the distances which can be obtained with the standard
or optional gear rations, respectively.
To change the standard gears and obtain the distances indicated, observe the safety
regulations, and proceed as follows:
- Tighten the wheel depth adjustment device (fig. 13.F) to reduce the tension of the chain
- Remove the casing (fig. 13.A) by turning the nuts (fig. 13.B)
- Without opening the chain, support the tensioning device with the chain still on it
- Move the chain to the outside of the lower and upper gears
- Release the chain tensioner gradually
- Change the gears by turning the appropriate fixing screws (fig. 13.D), positioning
them as shown in the table (fig. 14)
- Reposition the chain making certain that it is correctly inserted on the appropriate
chain tensioner (fig. 13.C)
- Fix the casing and return the depth adjustment device to its initial position.
G
A
B
C
D
WOLF
WOLF-COMPACT
F
FIG. 13
57