Wheel Scraper; Transplant Distance - Checchi & Magli TEX DRIVE BEST Bedienungsanleitung

25.0- WHEEL SCRAPER

It is possible to adjust the height from
the ground by operating the screws (fig.
18.A) and turning the support (fig.
18.B).
It is possible to adjust the distance from
wheels by operating the screws(fig.
18.C).

26.0 - TRANSPLANT DISTANCE

INTER-ROW: min. 50 cm for the single
frame version (fig. 19)
DISTANCE BETWEEN DOUBLE
ROWS : min. 25 cm for the DT double frame (fig. 20)
Inter-row spacing must be adjusted with the machine coupled to the tractor and with
the lift unit lowered.
Clean the hexagonal axis and the frame of any soil or other dirt, slacken the screws
(fig. 21.A), position the unit at the desired distance, sliding it along the frame. Do not
carry out these operations by hammering with metal objects as this could cause
serious damage to the components.
min. 50
TEX DRIVE BEST FIG. 19
A
TEX DRIVE BEST
B
C
min. 25
TEX DRIVE BEST DT
A
FIG. 18
FIG. 20
A
FIG. 21
49