Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Basic view of the display while riding:
The M button can be used to select the data visible at the lower right edge of the
display. Options: Odometer/Trip meter/Riding time/Max. speed/ Automatic switching
of view
Start-up:
1. Turn the display on by holding down the M button
2. Select your desired level of assistance with the + and – buttons.
You can also change the level of assistance while riding the bicycle.
Electric system's fault codes
The following fault codes indicate a fault corresponding to the code in the bicycle's
electric system. In case of a possible fault code, please contact maintenance.
The error code is corresponding with the fault definition.
Error code and definition
Normal
0
Current error or MOS
1
damaged
Throttle error (Start
2
detection)
Motor no phase position
3
Hall error
4
EN
46
Error code and definition
Brake error (Start detection)
5
Under voltage
6
Motor stalling
7
Communication controller
8
receiving error
Communication display
9
receiving error
Werbung
Inhaltsverzeichnis
