Installation And Deployment; Installing The Front Wheel (Quick Release, Disc Brakes) - FitNord Flow Benutzerhandbuch

Instructions for each model of FitNord electric bikes are guided by videos available on
YouTube, which go through every step in detail. The video instructions are available
at www.kuntokauppa.fi or on the Kuntokauppa YouTube channel at www.youtube.fi/
kuntokauppa.

3.1 Installing the front wheel (quick release, disc brakes)

1. Place the front wheel on the end of the fork. Loosen the spring and plastic cover
from the end of the quick-release lever and press the quick release lever's axle
through the hub.
2. Lightly tighten the nut of the axle in place, however, in such a way that the axle
has space to sit in the grooves of the fork.
3. Ensure that the brake disc is on the disc brake side It must be placed in the
centre of the disc brake.
4. Place the front wheel in place so that the brake disc sits between the brake discs.
Ensure that the disc brake does not twist the brake pads' position, but instead
remains straight and parallel between them.
5. Close the quick-release lever
6. The quick-release lever should be directed upwards and parallel with the front
fork so that the possibility of any branches etc. getting caught on it is as small
as possible.
EN
38
3 INSTALLATION
AND DEPLOYMENT