Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Location and Handling
This section describes precautions for installation location and handling. We recommend that you read
this section prior to using this machine.
Installation Precautions
Avoid Installing the Machine in the Following
Locations
Avoid locations subject to temperature and
●
humidity extremes, whether low or high.
For example, avoid installing the machine near
water faucets, hot water heaters, humidifiers, air
conditioners, heaters, or stoves.
Avoid installing the machine in direct sunlight.
●
If this is unavoidable, use curtains to shade the
machine. Be sure that the curtains do not block the
machine's ventilation slots or louvers, or interfere
with the electrical cord or power supply.
06
Installation Location and Handling
Avoid poorly ventilated locations.
●
This machine generates a slight amount of ozone
etc. during normal use. Although sensitivity to
ozone etc. may vary, this amount is not harmful.
Ozone etc. may be more noticeable during
extended use or long production runs, especially in
poorly ventilated rooms. It is recommended that the
room be appropriately ventilated, sufficient to
maintain a comfortable working environment, in
areas of machine operation.
Avoid locations where a considerable amount of
●
dust accumulates.
Avoid locations where ammonia gas is emitted.
●
Avoid locations near volatile or flammable
●
materials, such as alcohol or paint thinner.
Werbung
Inhaltsverzeichnis
