Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
03
Registering the Paper Information That
Was Loaded When Installing the
Machine
1. Select the paper source that you want to load
the paper type for → press [Set].
2. Select the paper type → press [OK].
If you select [Plain], you can select the
paper weight from [Plain Paper Weight
Set.].
If there is no button for the loaded paper,
press [Detailed Settings] → select the paper
type from the detailed setting screen.
04
Logging In
In order to continue on with network settings,
date/time, and fax settings, it is necessary to log
in as an administrator.
To end setting configuration here, press [End]
and see step 15.
1. Press [Log In] → enter the authentication
information → press [Log in] → [OK].
IMPORTANT
The default setting for both the System Manager ID
and System PIN is '7654321' . After installing the
machine, when logging in for the first time, enter
'7654321' for both the System Manager ID and
System PIN.
Using the Setup Guide to Configure the Machine
▼
27
Werbung
Inhaltsverzeichnis
